5 Operating conditions and handling
5.1 Ambient conditions in operation, at transport and storage
Ambient climatic conditions are defined in classes according to DIN EN 60721.
They are based on long-term experiences and take all influencing variables into
account, e.g., air temperature and air humidity.
The permanent use of motors according to class 3K4 by complying with the devi-
ations according the following table is possible. Comply with the specified con-
ditions for transport and storage.
Operation Transport Storage
Ambient temperature 0 … +40 °C -25 … +70 °C -25 … +55 °C
Relative humidity 5 … 95 % 5 … 95 % 5 … 75 %
Absolute humidity
1 … 29 g/m
3
1 … 60 g/m
3
1 … 29 g/m
3
Condensation Not allowed Not allowed Not allowed
Climatic class corresponding to 3K4 ac-
cording to EN 60721-3-3
corresponding to 2K3 ac-
cording to EN 60721-3-2
corresponding to 1K3 ac-
cording to EN 60721-3-1
Mechanical strength see
Chapter 5.4 "Vibration
load during operation"
see
Chapter 5.5 "Shock load during transport und stor-
age"
Tab. 5-1: Ambient conditions
5.2 Ambient temperature und installation altitude in operation
According to DIN EN 60034-1, the motor performance data specified below are
valid for:
● Ambient temperature 0 ... +40 °C
● Installation altitude 0 … 1,000 m above sea level
When exceeding the given limits, reduce the performance data of the motors.
Bosch Rexroth AG
Operating conditions and handling
MS2N Synchronous Motors
36/95
DOK-MOTOR*-MS2N*******-IT03-EN-P
To Next Page
Loading...
