P(N) Rated power - 100K m Mass
I(N) Rated current - 100K T.CL. Thermal class
n(N) Rated speed (100K) I.SY. Insulation system identification
M(0) Standstill torque - 100 K
SI
Use in systems for “integrated safety techni-
que” prepared.
I(0) Standstill current - 100 K
Brake Holding brake data (optional) Fan Data motor fan (optional)
Tab. 4-16: Type plate specification MS2N
The following marks of conformity are used.
Mark of conformity Meaning
Conformity with applicable EC Directives
For MS2N motors, conformity according to low-voltage directive 2014/35/EU , EN
60034-1, EN 60034-5.
The UL Recognized Component Mark identifies recognized component parts which
are components of a bigger product or system
Motors of MS2N series fulfill the specified technical requirements of the EAC member
states in the tariff union. The member states are Russia, Belarus and Kazakhstan.
Tab. 4-17: Meaning of marks of conformity
MS2N Synchronous Motors Bosch Rexroth AG
About this product
DOK-MOTOR*-MS2N*******-IT03-EN-P
35/95
To Next Page
Loading...
