Bosch Rexroth IndraDyn S MS2N - MS2 N Electrical connection V

6.2.5 MS2N Electrical connection "V"
View M40 power, M17 encoder (double cable connection) / rotating area
Flange socket Power Encoder
Connector size M40 M17
Output direction rotatable (max. 10x)
Adjustment torque 12 ... 18 Nm 2 ... 6 Nm
Locking (standard) SpeedCon SpeedCon
Tab. 6-9: MS2N..-.....-..V..-.....-.. Flange socket
Pol pattern M40 power, (double cable connection)
Designation
Function
Encoder
Ax Bx Cx Dx Hx Ax Bx Cx Dx Hx
with brake without brake
U1 A1 A1 A1 A1
V1 A2 A2 A2 A2
W1 A3 A3 A3 A3
PE PE PE PE
5 TP(+) n.c. TP(+) n.c.
6 TP(-) n.c. TP(-) n.c.
7 BD(+) BD(+) n.c. n.c.
8 BD(-) BD(-) n.c. n.c.
9 n.c. n.c. n.c. n.c.
Tab. 6-10: Pin assignment pole pattern M40, power
Note for assembly about SpeedCon connectors, see chapter 6.2.9 "SpeedCon
connectors" on page 66
Bosch Rexroth AG
Assembly
MS2N Synchronous Motors
56/95
DOK-MOTOR*-MS2N*******-IT03-EN-P