Why is the LED indicator flashing red on my Bosch Lubrication systems?
If the LED indicator on your Bosch Lubrication system is flashing red, it could be due to counter pressure exceeding 6 bar. You should check the lubrication points and reduce the counter pressure. After resolving the issue, clear the error message by pressing the SET key for more than 1 second.
Why is my Bosch Rexroth LU 2 Lubrication systems not delivering lubricant?
If your Bosch Lubrication system is not delivering lubricant, it could be due to a faulty electrical connection. Check the electrical connection.
How to troubleshoot no lubricant delivery in Bosch Lubrication systems?
If your Bosch Lubrication system is not delivering lubricant, ensure that the drive and oil container are properly bolted. Check the assembly.
What to do if LED indicator flashing red on Bosch Rexroth LU 2 Lubrication systems due to low temperature?
If the LED indicator on your Bosch Lubrication system is flashing red and the ambient temperature is too low (below -20 °C), you should increase the ambient temperature. After increasing the temperature, clear the error message by pressing the SET key for more than 1 second.
Why is the LED indicator flashing red on my Bosch Rexroth LU 2 Lubrication systems when the oil container is empty?
If the LED indicator on your Bosch Lubrication system is flashing red, it indicates that the oil container is empty. Replace the oil container.
What does it mean if the LED indicator is flashing green on my Bosch Rexroth LU 2 Lubrication systems?
If the LED indicator on your Bosch Lubrication system is flashing green, it means the oil container is empty. There is no further information provided.
General| Brand | Bosch |
|---|---|
| Model | Rexroth LU 2 |
| Category | Lubrication systems |
| Language | English |
Details prohibited uses and potential liabilities for misuse of the lubrication unit.
Outlines broad safety rules for accident prevention and environmental protection.
Details crucial safety precautions related to the product's specific operation and handling.
Explains how to set lubricant delivery based on time intervals and delivery periods.
Describes setting lubricant delivery based on pulse counts and required delivery volume per pulse.
Details how to connect the product to the electrical system, including plug assignment and cable colors.
Guides the initial setup, commissioning, and preparation for product operation.
Identifies common errors, their possible causes, and provides specific solutions for resolution.
To Next Page