Bosch Rexroth LU 2 - Install Support Bracket and Connector Set in the Holder

30/54 Installation
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2017-01
8.5.2 Install support bracket and connector set in the holder
Fig. 10:
E
F
358 814-20
Install support bracket and connector set in the holder
1. Pre-assemble the the
support bracket (E) and
the connection set (F).
2. Set the support bracket
and the connection in
the holder.
3. Connect hoses to
the lubrication unit
according to your
application (see also
page 33 to 37)
358814_2017_01_EN.indd 30 16.01.2017 13:38:19