Bosch Rexroth MKE Series - Page 29

M
max
① IndraDrive, controlled feed 3 x AC 400V
M
max
② IndraDrive, uncontrolled feed 3 x AC 480V
M
max
③ IndraDrive, uncontrolled feed 3 x AC 440V
M
max
④ IndraDrive, uncontrolled feed 3 x AC 400V
Fig.4-6: Speed-torque curve
Shaft and bearing load
For additional information about permissible radial and axial forces, see the
chapter chapter 9.10 "Bearings and Shaft Load" on page 86
Diagram for determining the maximum permissible radial F
radial
.
Fig.4-7: MKE037: permissible radial force (shaft and bearing load)
Axial force not permissible.
Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drives
and Controls
| Bosch Rexroth AG 27/131
Technical Data