EU design
UL design
Fig.10-1: Name plate (example MKE)
The name plate is provided for
● identification of the motor
● procurement of spare parts in case of a failure
● service information.
The type designation of the motor is also filed in the encoder data
memory.
10.3 Handling, Transport and Storage
CAUTION
Damage or injuries and invalidation of the warranty due to improper
handling!
⇒ Avoid mechanical stressing, throwing, tipping or dropping of the products.
⇒ Use only suitable lifting equipment.
⇒ Never lift up the motor on the optional fan housing.
⇒ Use suitable protective equipment and protective clothing during transport.
⇒ Protect the products from dampness and corrosion.
Also observe the notes regarding storage and transport on the packages
Handling
On delivery, the MKE motors have protective caps and covers on the output
shaft and on the flange sockets. During transport and storage, the protective
sleeves must remain on the motor.
● Remove the protective sleeves just before assembly.
● Also use the protective sleeves if you return the goods.
● Avoid damage to the motor flange and drive shaft.
96/131 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth MKE Synchronous Motors | Project Planning Manual
State of Delivery, Identification, Handling, Transport and Storage
To Next Page
Loading...
