Bosch Rexroth MM7.10 - Designations; Abbreviations

6/24 BODAS inertial sensor MM7.10 | About this documentation
BoschRexrothAG, RE 95178-01-B/2022-06-22
1.3.3 Designations
This documentation uses the following designations:
Table 4: Designations
Designation Meaning
MM7.10 BODAS inertial sensor
As ageneric term for the "Inertial sensor", the designation "product" or "sensor"
will be used in the following.
1.3.4 Abbreviations
This documentation uses the following abbreviations:
Table 5: Abbreviations
Abbreviation Meaning
ANSI American National Standards Institute is an organization that coordinates
the development of voluntary standards in the United States
CAN Controller Area Network
DIN Deutsches Institut für Normung (German Institute for Standardization)
ECU Electronic Control Unit
EMC Electromagnetic compatibility
EN European Norm (standard)
ISO International Organization for Standardization
PCB Printed Circuit Board
RE Rexroth document in the English language
TCD Technical Customer Documentation