16/78 General instructions on property damage and product damage
Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15
NOTICE
Danger due to chemical or aggressive environmental conditions!
Product can be damaged! If the control block/control block segment is exposed to
chemical or aggressive environmental conditions, corrosion and even malfunctions
may occur. Leaks may lead to a leakage of hydraulic fluid.
▶ Take suitable measures for protection of the control block/control block
segment against chemical and aggressive environmental conditions.
Escaping hydraulic fluid!
Environmental pollution and contamination of the ground water!
▶ When filling and draining hydraulic fluid, always place a drip tray under the
control block/control block segment.
▶ Use a suitable binding agent to collect any leaked hydraulic fluid.
▶ Observe the safety data sheet for the hydraulic fluid and the specifications
provided by the machine/system manufacturer.
Danger due to heat development in components!
Adjacent products may be damaged! Due to a heat development in components
(e.g.solenoids), adjacent products may be damaged during assembly if no
sufficient safety distance is complied with.
▶ When installing the control block/control block segment, check the distances to
nearby products to prevent any damage.
The warranty exclusively applies to the delivered configuration.
The warranty claim becomes void with
• Faulty installation, commissioning and operation,
• Improper use,
• Removal of the tamper-proof caps and seals (e.g.with pressure settings),
• Control of the settings at the factory,
• Unauthorized conversions and additional installations,
• Opening of the directional valve,
• Improper handling,
• Use of non-original spare parts by Rexroth.
To Next Page
Loading...
