Bosch Rexroth SB24/34 - 5.4 Control Block Versions and Combinations

About these products 47/78
RE 66170-B/2019-05-15, Control block SB24/34, Bosch Rexroth AG
5.4 Control block versions
The flange surfaces between control block segment are uniform and standardized to
enable combination of various control block segments.
5.4.1 Examples for control blocks with connecting plate, end plate and central
connecting plate
Mechanical control block Mechanical control block
with EHR24-EM2
EHS control block EHS control block
with EHR24-EHS
Mechanical control block with electrohydraulic hitch control
and central connecting plate
EHS control block with electrohydraulic hitch control
and central connecting plate
Mixed control block with EHR24-EM2 Mixed control block with EHR24-EM2 and central connecting
plate
The inlet and return lines of the flow can be directed via the C6connecting plate
or the central connecting plate.