8/78 About this documentation
Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15
1.3.4 Abbreviations
This documentation uses the following abbreviations:
Table 5: Abbreviations
Abbreviation Meaning
AP Connecting plate
CAN Controller Area Network
CVL Connection valve (with LS signaling direction from right to left)
da Double-acting
PRV Pressure relief valve
DIN German Industrial Standard
DMV Pressure reducing valve
EHR Electrohydraulic hitch control
EHS Electrohydraulic actuating unit
EVL End valve (with LS signaling direction from right to left)
EP End plate
IPC Individual pressure compensator
ISO International Organization for Standardization
PWM Pulse width modulation
RV Non-return valve
sa Single-acting
SPV Check valve
ZAP Central connecting plate
ZP Intermediate plate
To Next Page
Loading...
