4/78
Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15
6 Transport and storage 52
6.1 Transporting the control block/control block segment 52
6.1.1 Transport by hand 52
6.1.2 Transport with lifting gear 52
6.2 Storage of control block/control block segment 53
7 Installation 55
7.1 Unpacking 55
7.2 Assembly of control block segments to form a control block 55
7.3 Painting the control block/control block segment 55
7.4 Installation conditions 56
7.5 Installation position 56
7.6 Assembly of the control block/control block segment 56
7.6.1 Preparation 56
7.6.2 Attachment of the control block/control block segment 56
7.6.3 Completion of assembly 57
7.6.4 Mechanical connection of the control block/control block segment 57
7.6.5 Hydraulic connection of the control block/control block segment 58
7.6.6 Customer-specific coupling connection 60
7.6.7 Electric connection of the control block/control block segment 61
8 Commissioning 62
8.1 Before initial commissioning 62
8.2 Initial commissioning 63
8.3 Air bleeding 64
8.3.1 Air bleeding at control block/control block segment 64
8.3.2 Air bleeding at SB control valves 64
8.3.3 Air bleeding at control valves with EHS 65
8.3.4 Air bleeding at EHR control valves 66
8.4 Recommissioning after standstill 66
9 Operation 67
9.1 Software description 67
10 Maintenance and repair 68
10.1 Cleaning and care 68
10.2 Inspection and maintenance 68
10.3 Repair 68
10.4 Spare parts 69
11 Removal and replacement 70
11.1 Required tools 70
11.2 Preparing for removal 70
11.3 Removal of control block/control block segment from machine 70
11.4 Preparing the components for storage or further use 70
12 Disposal 71
13 Extension and conversion 72
14 Troubleshooting 73
14.1 How to proceed for troubleshooting 73
14.2 Malfunction table 74
15 Technical data 75
16 Alphabetical index 76
Contents
To Next Page
Loading...
