RE 30126-B/09.13 | Installation and Operation Hydraulics | Bosch Rexroth AG 11/32
Installing the VRPD 2
2.3 Transport, Storage and Handling the Controller Card
The packaging contains notes on handling of the controller card. These must be strict-
ly followed.
SDLC
ATT E
NTION
Stati
c Sensitive
Devices
Ha
ndle only at
Static Safe
Work
Stations
ATTENTION
C
ircuits sensibles à
l' éle
ctricité statiqu
e.
Manipulat
ion uniquement
autorisée
sur un poste de
travai
l protégé.
ACHTUNG
El
ektrostatisch
gefährdete
Bauelem
ente.
Handhabung daher nur an
geschützten
Arbeitsplätzen
erlaubt.
HA
CD_HW_DE_2-1
Fig. 1 Notes for handling printed on the packaging
Observe the following:
Keep the controller card away from moisture and dust
Observe the allowable storage temperature range of –20° C to +70 °C. (allowable
operating temperature: 0 – 50° C)
Electrostatic discharge (ESD) can damage components on the
controller card. To prevent damage, observe the following rec-
ommendations.
Discharge static voltage from your body using accepted practices.
Work in a safe environment. Do not use any devices in the working
environment that generate or hold static charge. Avoid working with
the controller card in areas where floors or work surfaces is com-
posed of materials that can generate a static charge.
Handle the controller card carefully. Do not touch any exposed pins
or electronic components.
Transport and store the control card in its original packaging.
To Next Page
Loading...
