6/32 Bosch Rexroth AG | Hydraulics Installation and Operation | RE 30126-B/09.13
1 General
Characters and Symbols
The following characters and symbols are used in the manual:
¾ Action symbol: The text following this symbol describes actions. These should be
performed, from top to bottom, in the given order.
9 Result symbol: The text following this symbol describes the results of an action.
Following this symbol you will find notes and useful tips for optimal use
of the controller card..
Special safety notes are provided at the relevant locations. These are indicated by the
following symbols.
If the hazard source can be specifically indicated, the corresponding pictogram will be
used.
Electrical current hazard
This symbol refers to a hazardous condition caused by electrical cur-
rent which, if not avoided, could result in death or serious injury.
Equipment damage
This symbol pertains to actions which could result in damage to
equipment.
Warning symbols
General hazard potential
Indicates a potentially hazardous condition which, if not avoided, could
result in death or serious injury
To Next Page
Loading...
