20/32 Bosch Rexroth AG | Hydraulics Installation and Operation | RE 30126-B/09.13
3 Startup of the VRPD Controller Card
3 Startup of the VRPD Controller Card
3.1 Preparing for Use
The startup procedure for the VRPD controller card depends on a variety of factors
that are determined by the individual application. For this reason, only the basic
startup steps are described in this manual.
Preparing the controller card for use:
¾ Carefully check cabling.
¾ Apply power to the VRPD controller card.
Fig. 6 Front panel of the VRPD Controller Card
9 The controller card performs an internal function test.
9 The display on the controller card shows the manufacturer name and version
number in scrolling text (when powered up)
To Next Page
Loading...
