Bosch RTM 430 - Special Accessories; Service Parts and Parts Subject to Wear20; Technical Data

20
9. Special accessories
Order number
RTM base 1 685 200 082
Car exhaust-sample probe 1 680 790 046
(only ...413, for measurements in
combination with a dynamometer)
Truck exhaust-sample probe 1 680 790 041
Exhaust-sample hose
Ø 16 mm, length 1 m 1 680 712 195
Ø 16 mm, length 3.5 m 1 680 712 201
Hose for exhaust-gas recirculation in
extraction system 1 680 707 100
RTM 430 connecting cable (12 m) 1 684 465 391
Heated exhaust-sample hose (5 m) 1 684 510 045
Clamping fixture with telescopic rod 1 688 040 258
10. Service parts and parts subject to wear
Order number
Car exhaust-sample probe 1 680 790 044
Exhaust-sample hose
Ø 10 mm, length 1 m (<) 1 680 703 047
RTM 430 connecting cable (8 m) (<) 1 684 465 467
Cover (<) 1 680 021 003
Cleaning brush (<) 1 687 929 006
Calibration pin 1 688 130 220
(<) Parts subject to wear
11. Technical data
Measured Display Measurement Resolution
variable range range
Degree of opacity 0 - 100 % 0 - 100 % 0,1 %
Coefficient of 0 - 9.9 m
-1
0.5 - 5.5 m
-1
0.01 m
-1
absorption k
Measuring chamber length: 432 mm
Power supply: via Emissions System
Analysis (ESA),
Bosch Emissions Analysis
(BEA) or
Emissions Analysis Tester
(EAM)
Application range: +2 °C to +40 °C
Relative air humidity
of ambient air:
< 90 % without thawing
Max. exhaust-gas temperature
at device input: 200 °C
Class of protection: IP 33
Dimensions: (W x H x D in mm) 594 x 203 x 151
Weight: approx. 8 kg
Noise emissions: < 70 dB(A)
Electromagnetic
compatibility (EMC): This product is a Class A
product in accordance with
EN 55022