Part I: Security System Basics
Fire Trouble and Fire Supervisory Events
Security System User's Guide 4998122475C
Special Fire Trouble and Fire Supervisory
Displays
If you silence the command center or clear a trouble or
supervisory condition for a Fire Point from the display
and the fire point remains in trouble, Fire Trouble or
Fire Supervisory appears in the command center’s
display.
They remain in the display until the condition causing
the trouble is cleared.
Note: Some fire points, when activated, will display
FIRE TROUBLE for a preset amount of time. If
no other fire activity is detected, this condition
will automatically clear. If the condition
remains or another fire detector is tripped, a
fire alarm will occur.
Viewing Fire Trouble and Fire Supervisory
conditions
After pressing COMMAND 4 or Silence> soft key, Fire
Trouble continues to automatically scroll through the
display. To view the faulted fire points, press any
numeric key, then press Next> to scroll these displays
manually if you wish. Events scroll from oldest to
newest.
To Next Page
Loading...
Need help?
General
