Part II: System Commands
Master Arming all Areas
4998122475C Security System User's Guide
Master Arming all Areas
If you prefer, you may use MASTER ARM ?> command
in the Command Menu to initiate this function and
allows you to arm all or selected areas.
Press the Menu> key to enter the Command Menu,
then press Next> repeatedly until you reach the
MASTER ARM?> prompt. Then press the soft key
adjacent to MASTER ARM?>.
Upon entering this menu
selection, MASTER ARM
ALL ? is displayed first.
Press Arm> to Master
Arm all areas.
Or press the Next> soft key to view each unarmed area
and optionally arm each one. To arm a selected area,
press Next> until the desired area appears (Area name
text along with Arm Area # ?). Then press Arm>.
When arming individual areas, the command center
will momentarily display that the area is arming before
providing the option to arm additional disarmed areas.
To Next Page
Loading...
