Part I: Security System Basics
Fire Trouble and Fire Supervisory Events
4998122475C Security System User's Guide
Fire Trouble and Fire Supervisory Events
When a fire trouble or fire supervisory condition
occurs, your command center emits three warble tones,
then a pause (repeatedly).
The system displays the number of fire points that are
in a trouble or supervisory condition.
Silencing Fire Trouble and Fire Supervisory
conditions
Pressing COMMAND 4 or
Silence> silences and
clears Fire Trouble and/or
Fire Supervisory
conditions.
In addition to this, entering a personal passcode with
the proper authority level silences a fire trouble and
disarms the panel if it was armed. Use COMMAND 40
if you wish to review these cleared troubles.
Note: Some systems may be programmed to
automatically re-sound the command center’s
trouble tone after a period of time if the fire
trouble or fire supervisory condition remains.
Consult your security company for further
information.
To Next Page
Loading...
