Part II: System Commands
Turning the System On (Arming) With Doors or Windows Open
Security System User's Guide 4998122475C
Indicates that more than the number of
allowable points are faulted. Bypassed points
are counted as faulted. Your system’s
maximum number of bypassed and/or force
armed points is set by your security company.
Check with them to learn this number.
4.
The display shows AREA 1 WAREHOUSE
Not Ready to Arm.
5.
Pressing the View Points> soft key will show
the specifics for any points that are faulted or
bypassed.
Faulted points are displayed first followed by
bypassed points.
6.
The display changes to show the number of
faulted points in the area.
Press Next> soft key repeatedly to scroll
through the point text for each faulted point.
If you do not want to go
through the list of faulted
points and want to go directly
to the Force Arm> soft key or
Force/Bypass Arm> soft key,
press the COMMAND button.
7.
Once the last faulted point is displayed,
pressing the Next> soft key will start
displaying a summary and then specifics of
any bypassed points.
To Next Page
Loading...
Need help?
General
