Bosch Security System User Manual

Part II: System Commands
PERIMETER DELAY ? (COMMAND + 3)
4998122475C Security System User's Guide
PERIMETER DELAY ? (COMMAND + 3)
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only arm
the perimeter and exit through a door programmed for
exit delay. The interior of the building remains disarmed.
People or pets are free to move throughout the interior of
the premises.
This function is also useful in commercial systems when
you are working before or after business hours and wish
to have the perimeter armed. Other system users can enter
through doors programmed for entry delay, which will
start the entry delay sounder and countdown.
Using Perimeter Delay
1.
Interior points are not armed with this command
and may remain faulted while arming with
COMMAND 3.
2.
Press the COMMAND
key.
3.
The display shows
*System Command*.
4.
Press the 3 key.
Note: If you prefer, you may use the Command Menu in
place of steps 2 and 3 to initiate this function.
Press the key adjacent to Menu> to enter the
Command Menu, then press the key adjacent to
Next> repeatedly until you reach the PERIMETR
DELAY ?> prompt. Press the key adjacent to
PERIMETR DELAY ?>.

Bosch Security System Specifications

General

Brand	Bosch
Category	Security System
Alerts	Email, SMS, Push notifications
Remote Access	Mobile app
Encryption	AES-128
Warranty	2-3 years