Bosch Security System - Page 51

Part II: System Commands
Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4)
4998122475C Security System User's Guide
Silence the Trouble Sounder & Clear Trouble Display (COMMAND + 4)
Description
Use COMMAND 4 to silence the trouble sounder
during system events. This command also clears system
messages from the display. The *Alarm Silenced*
display will continue to scroll to remind you that
cleared events can be seen with the View Memory
function (see View Memory ?).
Using COMMAND 4:
1.
Press the
COMMAND
key.
2.
The display
shows *System
Command*.
3.
Press the 4 key.
4.
The Command Center sounder is silenced.