Bosch Security System - Page 57

Part II: System Commands
WALK TEST ? (COMMAND + 4 + 4)
4998122475C Security System User's Guide
Press the View untested
pts> soft key.
6.
The display shows ###
pts untested.
Press the Point information> soft key to see
information about specific points that have not yet
been tested.
The display changes to
show the information
for that point.
Move through this list
by pressing the Next Pt>
or Prev Pt> soft keys.
Press the Exit> soft key to return to the ### points
remain to be tested screen before continuing with
the walk test.
7.
When all points have
been tested, 0 points
remain to be tested. is
displayed.
Press <Exit.
The display
momentarily shows All
points have been tested
before returning to idle
text.