Bosch Security System User Manual

Part II: System Commands
RESET SENSORS ? (COMMAND + 4 + 7)
Security System User's Guide 4998122475C
5.
This display
SENSORS…
RESETTING…
PLEASE
WAIT…shows for
approximately 3
seconds
and then shows
Retrieving Panel
Information while
retrieving the panel
information again
before returning to
idle disarmed text.
If you enter this function and the detector or sensor
resets momentarily, but then returns to a faulted
condition, the conditions causing the activation may
still be present or the detector may be faulty. Check to
be certain that there is no smoke, fire, or other danger
present. If you can’t reset the detector or sensor contact,
your security company.

Bosch Security System Specifications

General

Brand	Bosch
Category	Security System
Alerts	Email, SMS, Push notifications
Remote Access	Mobile app
Encryption	AES-128
Warranty	2-3 years