Bosch SHP65CC5UC - Switching off the Water Softening System; Rinse Aid System; Rinse Aid

en-us Rinse aid system
24
9.4 Switching off the water
softening system
If you do not need to use the water
softening system, e.g. you already
have a whole house water softening
system, you can turn the system off.
Note
To avoid damage to the appliance,
only switch off the water softening
system in the following cases:
¡ The water hardness is max. 26°E
and you are using combined
detergents with salt replacement
substances. According to
manufacturers, combined
detergents with salt replacement
substances can generally only be
used up to a water hardness of
26°E without adding special salt.
¡ The water hardness is 0 - 8°E. You
can omit special salt.
1. Press ⁠.
2. To open the appliance settings,
press button for 3 seconds.
1
2
3
A
A
a The special salt refill indicator lights
up.
3. Press repeatedly until no LED
lights up.
4. To store the setting, press button
for 3 seconds.
a The water softening system is
switched off and the salt refill
indicator is deactivated.
Rinse aid system
10 Rinse aid system
Rinse aid system
10.1 Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid intended for
household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights up,
fill the dispenser with rinse aid. Only
use rinse aid intended for household
dishwashers.
1. Press the catch on the lid of the
dispenser for rinse aid and lift ⁠.
1
2
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it from
the tub.