en-us HomeConnect®
38
15.1 Setting up the
HomeConnect® app
1. Install the HomeConnect® app on
your mobile device.
2. Start the HomeConnect® app and
set up access for HomeConnect®.
The HomeConnect® app guides
you through the entire registration
process.
15.2 Setting upHomeCon-
nect®
Requirements
¡ The HomeConnect®app is
installed on your mobile device.
¡ The appliance receives signals from
the WLAN home network (Wi-Fi) at
its installation location.
¡ The appliance door is closed.
1. Open the HomeConnect® app and
scan the following QR code.
2. Follow the instructions in the
HomeConnect® app.
15.3 HomeConnect® settings
Adapt HomeConnect® to your needs.
You can find the HomeConnect®
settings in the basic settings for your
appliance. Which settings the display
shows will depend on whether
HomeConnect® has been set up and
whether the appliance is connected to
your home network.
15.4 Remote Start
You can use the HomeConnect® app
to start the appliance with your mobile
device.
Note:You can change settings using
the HomeConnect® app.
Activating Remote Start
Requirements
¡ The appliance is connected to your
WLAN home network.
¡ The appliance is connected to the
HomeConnect® app.
¡ A program is selected.
▶ Press .
If you open the appliance door, the
function is automatically
deactivated.
a button lights up.
Tip:To deactivate the function, press
.
Note
The following settings are possible
using the HomeConnect® app:
¡ Deactivate the function
permanently.
¡ Select the function using the
button. This setting is the default
preset at the factory.
¡ Activate the function permanently.
With this setting pressing button is
not necessary.
To Next Page
Loading...
