EasyManua.ls Logo

Bosch SHP65CC5UC - Preventing Material Damage; Environmental Protection and Energy-Saving; Saving Energy; Aquasensor

Bosch SHP65CC5UC
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preventing material damage en-us
9
Preventing material damage
2 Preventing material
damage
Preventing material damage
NOTICE:
Harsh chemicals such as bleach-
based products can damage your
dishwasher.
Do not use harsh chemicals such as
bleach-based products to clean your
dishwasher.
Certain cleaning products may
damage the appliance.
Do not use a steam cleaner.
So as not to scratch the finish on
the appliance, do not use sponges
with a rough surface or abrasive
cleaning agents.
Avoid stainless steel polish
Do not use stainless steel polish on
an anti-fingerprint finish or a black
stainless finish.
Escaping water vapor can damage
cabinetry.
When the program ends, let the
appliance cool down a bit before
opening the door.
Protect your appliance from the
elements.
Protect against freezing to avoid
possible damage to the fill valve.
Damage caused by freezing is not
covered by the warranty.
Special salt for dishwashers can
damage the tub due to corrosion.
To make sure that any special salt
that escapes is washed out of the
tub, add the special salt to the
dispenser for special salt
immediately before the program
starts.
Detergent may damage the water
softening system.
Only fill the dispenser of the water
softening system with special
dishwasher salt.
Environmental protection and energy-saving
3 Environmental protec-
tion and energy-saving
Environmental protection and energy-saving
3.1 Saving energy
If you follow these instructions, your
appliance will use less power and
water.
Use the Normal program.
a
The Normal program is energy-
efficient and environmentally
friendly.
→
"Dishwasher Cycles", Page14
3.2 AquaSensor
The AquaSensor is an optical
measuring device (light barrier) which
measures the turbidity of the washing
water. You can save water with the
AquaSensor.
The operation of the AquaSensor
depends on the selected cycle. If the
soiling level is high, the washing water
is drained off and replaced with fresh
water. If the soiling level is lower, the
washing water is used in the next
rinse, so reducing water consumption
by 3-6 liters. In the Auto cycles the
temperature and run time are
additionally adjusted to the level of
soiling.

Table of Contents

Related product manuals