Bosch SHP65CC5UC - Basic Settings; Overview of the Basic Settings

en-us Basic settings
34
Basic settings
14 Basic settings
Basic settings
You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings
The basic settings depend on the features of your appliance.
Basic setting Selection Description
W. hardness Scale with 4 levels Set the water hardness.
→ "Setting the water soft-
ening system", Page22
Rinse aid disp. Scale with 4 levels Set or switch off the
amount of rinse aid to be
dispensed.
→ "Setting the amount of
rinse aid", Page25
Intensive drying On
Off
1
Switch intensive drying on
or off for each operation.
The temperature in the
final rinse is increased for
a better drying result. This
may increase the run time
slightly.
Note:Please take care
with delicate dishware.
→ "Setting intensive dry-
ing", Page35
Signal volume Scale with 4 levels Adjusting the signal
volume.
→ "Setting the signal vol-
ume", Page36
1
Factory setting (may vary according to model)