Bosch SHP65CC5UC - Page 52

en-us Troubleshooting
52
Issue Cause and troubleshooting
Appliance cannot be
switched on or
operated.
4. Switch the appliance on.
Appliance does not
start.
The breaker has tripped.
▶ Check the relevant breaker.
Power cord is not inserted.
1. Check whether the power outlet is working.
2. Check whether the power cord plug is properly
inserted in the power outlet and on the rear of the
appliance.
Appliance door is not closed properly.
▶ Close the appliance door.
Wash cycle starts up
automatically.
You did not wait until the cycle ended.
▶
→ "Terminating the wash cycle", Page33
Appliance stops during
the cycle or cuts out.
Appliance door is not closed properly.
▶ Close the appliance door.
Power and/or water supply has been interrupted.
1. Check the power supply.
2. Check the water supply.
Upper rack is pressing against inner door and
preventing appliance door from being closed securely.
▶ Check whether the rear panel of the appliance is
being pressed in by a power outlet or a hose holder
that has not been removed.
▶ Arrange the dishware so that no parts project beyond
the rack and prevent the appliance door from closing
properly.
Appliance door cannot
be closed.
Door lock has been activated.
1. Close the appliance door with greater force.
2. If the installation conditions prevent quick realignment
of the closing system, you can move the door lock
back to the home position using a spoon.
See the animation for how to move the door lock to
the home position.