Name: Bosch Smart Home controller II
Brand: Bosch
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Smart Home Controller II English | 10

8-750-002-895 | V001 | 01/2024 Bosch Smart Home

↑Content

Download the “Bosch Smart Home” app from your app store. You will

need this for installation, conguration and operation.

QR code

for the Apple App Store

QR code

for the Google Play Store

݅ To congure the controller, your mobile device must be on the same

network.

Start the Bosch Smart Home app and follow the instructions.

The Bosch Smart Home system can be used by other mobile devices. To

do this, rst install the Bosch Smart Home app on the additional mobile

device and follow the instructions in the app.

You can also use the explanatory videos and additional information on

our website as an additional aid for mounting, installing, starting up and

restoring the factory settings on your Bosch Smart Home controller:

→ https://www.bosch-smarthome.com/rom/controller-2

Resetting to factory settings

You have two options for resetting the Smart Home controller to the fac-

tory settings:

1. Reset via Bosch Smart Home app

Go to “More” then “System” in the app and select “Factory settings”.

Follow the instructions.

2. Reset via the reset button

Press the reset button (5) until the status LEDs (2, 3, 4) on the front

ash red, release it briey and press and hold it again until the LEDs

light up yellow. The device then restarts. Please note that it can take a

few minutes until the controller is ready for operation again.

݅ When resetting the Smart Home controller to the factory settings (using

the app or the reset button), only the Smart Home controller is reset.

All Smart Home devices that were previously integrated should be manu

ally reset after resetting the controller.

Other manuals for Bosch Smart Home controller II

Questions and Answers:

Need help?

Do you have a question about the Bosch Smart Home controller II and is the answer not in the manual?

General