Bosch Smart Home controller II User Manual

Smart Home Controller II English | 6
8-750-002-895 | V001 | 01/2024 Bosch Smart Home
↑Content
▶ Do not open up the device. It does not contain any parts to be main-
tained by the user. If a fault occurs, have the device checked by a spe-
cialist.
▶ Only operate the device indoors and do not expose it to moisture, vibra
-
tions, constant sunlight or other sources of heat, extreme cold tempera-
tures and mechanical stress.
▶ Only use the device together with original components and recommend
-
ed products from Bosch partners.
Notes
▶ The range within buildings can deviate greatly from the range in open
spaces. In addition to the transmitting power and the receiving proper
-
ties of the receiver, environmental factors such as humidity, as well as
the local structural situation, play an important role.
▶ The device is only intended for use in residential environments.
▶ The device is only intended for private use.

Bosch Smart Home controller II Specifications

General

Power Supply	5V DC, 1A
Storage Temperature	-20°C to 60°C
Protection Class	IP20
Wireless Protocols	Zigbee 3.0
Operating Temperature	0°C to 40°C
Compatibility	Bosch Smart Home System
Operating Humidity	20% to 80% (non-condensing)
Relative Humidity	5% to 95% non-condensing