Bosch Smart Home controller II User Manual

Smart Home Controller II English | 12
8-750-002-895 | V001 | 01/2024 Bosch Smart Home
↑Content
Open source software
This Bosch Smart Home product uses open source software. You can ob-
tain the license information in two ways:
1. Directly via the Smart Home controller: Do this by inserting any emp
-
ty USB stick into the USB port on the back of the device. The license
information along with further product information will automatically be
saved on the stick.
2. Online at
→ https://www.bosch-smarthome.com/rom/open-source-software
Communication between iPhone, iPad, Apple Watch, HomePod, HomePod
mini, or Mac and the HomeKit-enabled Smart home controller is secured
by HomeKit technology.
Technical data
Device type designation BSHC-2
Protection type IP20
Ambient temperature +0 °C to +40 °C
Max. humidity 85 % (non-condensing)
Housing dimensions (W × H × D) 100 × 100 × 29 mm
Weight 110 g
Supply voltage 5 V
DC
Max. power consumption 2 A
Typical power consumption 0.4 A
Radio protocol ZigBee 3.0
Radio frequency band 2.4 – 2.4835 GHz
Max. transmitting power 10 dBm
Radio range in the open < 100 m
Software class A
Receiver category 2
Network connection RJ45; port speed 10/100 Mbit/s
Technical modications reserved
Spare parts / accessories
For information on available spare parts or accessories, please visit:
→ https://www.bosch-smarthome.com/rom/spareparts

Bosch Smart Home controller II Specifications

General

Power Supply	5V DC, 1A
Storage Temperature	-20°C to 60°C
Protection Class	IP20
Wireless Protocols	Zigbee 3.0
Operating Temperature	0°C to 40°C
Compatibility	Bosch Smart Home System
Operating Humidity	20% to 80% (non-condensing)
Relative Humidity	5% to 95% non-condensing