Bosch TouchOne - Adding;Changing a User Photo; Editing a User PIN; Adding a Mobile Device

1514
4.4 Adding / Changing a User Photo
Users can have photos added to them to provide a faster means of identifying them
when you have many users on the system. This photo is only stored on the TouchOne.
1. From the Home Screen, touch the Settings button.
2. Touch the Users menu item.
3. Enter your Master Code. The keypad will shake if the code is incorrect.
4. Touch the user you want to add / change the photo of.
5. Touch the Change Photo button.
6. The circle photo image will show the camera. Centre your face in the circle and touch
the Take Photo button. A countdown from 3 will display, and the photo will be taken at
the end of the countdown. A shutter sound will conrm the photo has been taken.
7. Touch the back button in the screen title bar to conrm the Change Photo action and
go back to the Users Screen.
4.5 Editing a User PIN
1. From the Home Screen, touch the Settings button.
2. Touch the Users menu item.
3. Enter your Master Code. The keypad will shake if the code is incorrect.
4. Touch the user whose PIN you wish to edit.
5. Touch the [Edit] button under the PIN section.
6. Enter the digits required for the new code.
7. Touch the back button in the screen title bar to conrm the Edit User action and go
back to the Users Screen.
4.6 Adding a Mobile Device
The TouchOne allows you to pair your Bluetooth 3.0 enabled mobile phone with
your user on the Control Panel. When at least one mobile phone has been paired
with a user, 30 seconds after the Control Panel has been armed in AWAY Mode, the
TouchOne will search for your Mobile Phone periodically and automatically disarm
the system with the user PIN that mobile was associated to.
In order for this feature to work, you must have Bluetooth enabled on your phone
when you come within 5 to 10 metres of the TouchOne device.
1. From the Home Screen, touch the Settings button.
2. Touch the Users menu item.
3. Enter your Master Code. The keypad will shake if the code is incorrect.
4. Touch the user your want to associate with your mobile phone. This user’s PIN is en-
tered when your mobile device comes within range.
5. Touch Add Mobile Device
6. On your mobile phone, open the Bluetooth settings and ensure your Bluetooth is on
discoverable mode.