1716
7. The TouchOne will display a list of discoverable Bluetooth devices in range. Touch the
Bluetooth device you want to pair.
8. A pairing dialog box will be shown on both the TouchOne and your mobile device.
Touch the pair button on both.
9. Touch the back button in the screen title bar to go back to the Users Screen.
4.7 Removing a Mobile Device
1. From the Home Screen, touch the Settings button.
2. Touch the Users menu item.
3. Enter your Master Code. The keypad will shake if the code is incorrect.
4. Touch the user whose associated mobile phone should be removed.
5. Touch Remove Mobile Device.
6. Touch the back button in the screen title bar to go back to the Users Screen.
4.8 Adding an RF Keyfob
1. From the Home Screen, touch the Settings button.
2. Touch the Users menu item.
3. Enter your Master Code. The keypad will shake if the code is incorrect.
4. Touch the user who needs the RF Keyfob adding.
5. Touch the Add RF Keyfob button.
6. Follow the instructions on screen to pair the RF Keyfob.
4.9 Deleting an RF Keyfob
1. From the Home Screen, touch the Settings button.
2. Touch the Users menu item.
3. Enter your Master Code. The keypad will shake if the code is incorrect.
4. Touch the user needs the RF Keyfob removing.
5. Touch the Remove RF Keyfob button.
5 Outputs
This feature is only applicable if your installer set up an output that can be turned on
or off by the codepad. The output programmed by your installer can control a pool
pump or outside lighting. Up to 3 separate outputs can be programmed.
5.1 Controlling Outputs
1. From the Home Screen, touch the Settings button.
2. Touch the Control menu item.
3. Choose the output you wish to control. Slide the Toggle switch from the left to the
right so a tick icon is shown to turn on an output, or slide it from the right to the left so
a cross icon is shown to turn the output off.
To Next Page
Loading...
