AutoDome Modular Camera System VG4 Firmware Updates via a TCP/IP Network | en 11
Bosch Security Systems, Inc. Firmware Update Manual F.01U.097.269 | 1.06 | 2011.09
1.7.3 Alternate Language Option
Certain Service Packs, versions 1.03 and later, may include the option to upload additional
languages to the VG4 AutoDome. The firmware file to add a new language is located in the
Language folder. Before installing an additional language, you must first upgrade the SCBoot
and the SC Main files (refer to Section 1.7.2 Selecting and Uploading Firmware Files, page 8).
The procedure for uploading an additional language is the same as uploading the other files.
Note: The VG4 Series AutoDome supports one additional language.
To install an additional language to the AutoDome:
1. From the IP AutoDome LIVEPAGE, select the SETTINGS link at the top of the window.
2. Click the Service Settings link in the left pane.
3. Click the Maintenance option to open the Maintenance window.
4. In the Maintenance window, click the firmware upload Search button, and browse to the
Language folder in the service pack.
5. Select and open the Language folder.
Figure 1.10 Language folder
6. Select the language_Lang_xx.xx.xx.xx.G4i file, and then click the Open button.
Figure 1.11 Select the Language file
7. Check the Language Table box under the subcomponents upload window.
Figure 1.12 Check the Language Table box
To Next Page
Loading...
Need help?
General
