AutoDome Modular Camera System VG4 Firmware Updates via the CTFID | en 29
Bosch Security Systems, Inc. Firmware Update Manual F.01U.097.269 | 1.06 | 2011.09
2.5.7 Additional Language Option
Certain Service Packs, versions 1.03 and later, may include the option to upload the additional
languages to the VG4 AutoDome. The firmware file to add a new language is located in the
Language folder. Before installing an additional language, you must first upgrade the SCBoot
and the SC Main files (refer to Section 2.5.4 Selecting and Uploading Firmware Files). The
procedure for uploading an additional language is the same as uploading the other files.
Note: The VG4 Series AutoDome supports one additional language.
To install an additional language to the AutoDome do the following:
1. From the CTFID Main Window, click the Firmware Upload button located on the lower left
side of the right pane.
2. Navigate to the Language folder and double-click on the folder to refresh the files in the
Choose Service Pack Folder pane on the left.
3. Click the Select button to display the sub-component file list.
Figure 2.22 Select Language folder
4. Check the Language Table box in the Select Firmware Upload dialogue window.
Note: You must
check the Language Table box in the sub-components list to select the
additional language file for upload.
To Next Page
Loading...
Need help?
General
