AutoDome Modular Camera System VG4 Firmware Updates via a TCP/IP Network | en 5
Bosch Security Systems, Inc. Firmware Update Manual F.01U.097.269 | 1.06 | 2011.09
1.5 Beginning the Firmware Update Process
Use this procedure to connect to your IP AutoDome (VG4 100, 200, 300 or 500i Series
AutoDome) and to navigate to the Firmware Update page.
1. Launch Internet Explorer and type the IP address for the AutoDome in the Address bar
and click Go.
Internet Explorer opens the Livepage view for the IP AutoDome.
2. Click the SETTINGS link, located at the top of the page.
Figure 1.1 Select SETTINGS link
3. Click the Service link in the left pane.
Figure 1.2 Select the Service link
To Next Page
Loading...
Need help?
General
