12 en | VG4 Firmware Updates via a TCP/IP Network AutoDome Modular Camera System
F.01U.097.269 | 1.06 | 2011.09 Firmware Update Manual Bosch Security Systems, Inc.
8. Click the Upload Firmware button to start uploading the file. The browser displays a
warning message.
9. Click OK to continue the firmware upload.
The page displays a progress bar. Once the progress bar reaches 100% the system opens the
reset page. Allow the reset page to complete its action.
10. The AutoDome will restart and reconnect to the web browser after a successful upload.
Refresh the window to restore the video to the AutoDome LIVEPAGE.
1.7.4 Changing the VG4 AutoDome OSD Language
There are two methods to change the VG4 AutoDome on-screen-display (OSD) language:
1. From the IP Autodome SETTINGS page:
a. Click the Camera Settings link in the left pane.
b. Click the Display link option.
c. Click Settings Group 1.
d. Select the appropriate OSD language from the Language drop down menu in the
Settings Group 1 pane on the right.
2. From the AutoDome OSD menu:
a. Enter ON-46-ENTER from a control keyboard to open the Main menu.
b. Use the joystick control to select the Language menu and press a Focus or Iris
button.
c. Use the joystick control to select to select the appropriate Language and press a
Focus or Iris button.
d. Exit the Language menu and then the Main menu.
CAUTION! Do not perform any action, click any object in, or minimize the Internet Explorer
browser window that is uploading the service pack files.
To Next Page
Loading...
Need help?
General
