Bosch VIA - Page 46

MD deck operation <Edit>
L\ notice
| Editing is not possible when using DC power.
The editing function allows you to divide a song from the middle so that you can pick up the beginning at any point on a
recorded disc, or to connect two consecutive songs to edit them after recording. , the ‘Combine" function that connects songs, the Move"
function that moves songs, and the "Name in" title function that allows you to name a song or disc.
— Precautions when editing
When “Protected” is displayed
The disk is protected against accidental erasure. Cannot be edited. Move the accidental erasure prevention knob to close the hole before editing.
About handling MDs + page 33 When
you try to remove the disc or turn off the power, "TOC Writing” will flash and the edited content will be recorded on the disc.
While “TOC Writing” is flashing, the edited content is being recorded, so do not shake the unit or unplug the power plug from the outlet.
Separating songs (divide function)
After recording, one song is divided into two songs and a new song number is Example: When dividing the second song into two songs, 8 and C.
recorded for cueing. Use this when multiple songs are recorded under one track number, Song rbot Sa
such as on an analog-recorded MD, or when creating a cue point in the middle of as eaters
‘a.song, The song numbers after the divided songs are incremented one by one, and
consecutive song numbers are automatically added.
=
=
= While playing, press this button at the point where you want to separate the
ay
songs.
The
performance
wil
be
paused
edit Press this button until "Divide?" appears on the
BO Ces
mset " * and“ a
ne 3 Press this button. "Rehearsal" and "Position ok?" will appear
(4) O alternately on the display, and the part that separates will be
played repeatedly.
edit 4 Press this button when you are not playing the section repeatedly.
(3) ©) The divide function is canceled and normal performance
returns. If you are playing the part that separates correctly,
move on to step 7.
44