Appendix
43
Gaz 6000 W – 6720866247 (2019/07)
Table 29 Commissioning report
Changed service functions
Read off the changed service functions and enter the values here.
Label with “settings in the service menu” filled out and affixed.
Heating controls:
Weather-compensated control Room temperature-dependent control
Remote control × ...... pce., heating circuit(s) coding:
Room temperature-dependent control × ...... pce., heating circuit(s) coding:
Module × ...... pce., heating circuit(s) coding:
Miscellaneous:
Heating controls set, Notes:
Changed settings for the heating controls documented in the operating/installation instructions for the control unit
The following work has been carried out:
Electrical connections checked, Notes:
Condensate trap filled Leak test carried out on the gas and water sides
Function check carried out
Commissioning includes checking the setting values, a visual leak test on the device and a function check of both the device and its control. The system
installer conducts a test of the heating system.
The system named above has been checked to the extent described.
___________________________________________________________
Name of service engineer
The documents have been handed over to the user. The user has been
made aware of the safety instructions and operation of the above-
mentioned wall mounted boiler, including accessories. Attention has been
drawn to the requirement for regular maintenance of the above-mentioned
heating system.
__________________________________________________________
Date, user's signature
____________________________________________________________
Date, system installer's signature
Affix the test report here.
To Next Page
Loading...
