Bose Professional VIDEOBAR VB-S - Update the Software; Forgotten Password; Restore the Factory Default Settings

To Next Page

To Previous Page

45 EN

CARE AND MAINTENANCE

Restore the Factory Default Settings

Restoring the factory default settings will do the following:

Clear the list of

Bluetooth

devices paired to the VB‑S.

Clear the camera presets (Home, Preset1, and Preset2).

Return all camera, microphone, and speaker settings to their default

values. (Many of these settings are conﬁgured in the Videobar

Conﬁguration software or Videobar Administration software.)

Reset the administrator password to Bose123!

Note: We recommend changing the password after resetting it.

To restore all settings of the VB‑S to their factory defaults, press and

hold the Home button and Autoframe button on the remote control

simultaneously for 5seconds.

A small section of lights in the center of the light bar will pulse white

repeatedly. The lights will then move outward from the center until the

whole light bar is lit solid white. The lights will then fade out. When this

process is completed, the VB‑S will restart with its factory default settings.

Forgotten Password

If you have forgotten the password to access the Administrator

conﬁguration settings, you must restore the factory default settings to reset

the password (see Restore the Factory Default Settings (Page45)).

Note: We recommend changing the password after resetting it.

Update the Software

You can use the Videobar Conﬁguration app and Videobar Administration

app to check for and install VB‑S ﬁrmware updates. See Software

Applications (Page23) to learn how to download and access these

software apps.

If you are using the Videobar Conﬁguration WebUI to conﬁgure the VB‑S,

you may not be able to automatically check or update the ﬁrmware from the

online server unless your computer is also connected to the internet.

If you cannot access ﬁrmware updates while using the WebUI, do one of

the following instead:

Use the Videobar Conﬁguration app.

Use the Videobar Administration app.

Download the ﬁrmware ﬁle directly to your computer, and then use the

Videobar Conﬁguration WebUI to update the ﬁrmware as if it were a

previous version.