44
OPERATION
ItalianoSvenska DeutschNederlands EnglishFrançais Español
Playing a cable box or
other component
1. Press the button for the source
(CBL•SAT or AUX) you want to
play.
This turns on the 3•2•1
®
system to
the selected source.
2. Turn on your component and, if it
is a video source, turn on the TV.
If the 3•2•1 remote is set to
control the component, you can
press the source On/Off button on the remote.
3. Choose the proper Video Input on your TV if the
source is a video component.
Adjusting for audio delay
While playing a DVD, you may notice that the picture
and audio are not in perfect sync. For example, you see
a person’s lips move after you hear the words.
To make small adjustments to this timing, use the audio
delay setting on the 3•2•1 system:
1. Press the Settings button on the 3•2•1 remote
control.
The Settings menu appears on screen.
2. Move down to the audio delay icon and press
ENTER.
3. Select an adjustment (1-8) and wait to see if this
corrects the problem.
Each selection makes a minute timing adjustment.
It may be difficult to notice the change.
To Next Page
Loading...
Need help?
General
