46
OPERATION
ItalianoSvenska DeutschNederlands EnglishFrançais Español
Listening to the radio
Your 3•2•1
®
system includes an FM and AM radio.
1. On the 3•2•1 remote, press FM•AM.
This turns on the 3•2•1 system and plays
the radio station last selected.
2. Press the FM•AM button to switch between FM
and AM.
3. Press the Channel up or down buttons to
tune from one station to another.
To tune to:
• A preset station, press the Preset number button.
• The next clear station, press a Seek button.
Creating a preset
You can assign a preset number for 20 FM and 20 AM
stations. Then, by pressing the preset number, you tune
immediately to the particular station:
1. Tune to the station you want to assign to a preset.
2. Choose the number you want to assign to that
station.
3. Press and hold the chosen number button:
• For numbers 1 through 9, press and hold the
button.
PRESET:x* SET appears briefly on the media
center display.
• For numbers 10 through 20, press the first
number, then press and hold the second number.
PRESET:xx* SET appears briefly on the display.
Removing a station from a preset
1. Press the number of the preset.
2. Listen to be sure this is the preset you want to
erase.
3. Press and hold zero.
PRESET:xx* ERASED appears briefly on the
display.
*x represents the number you select.
To Next Page
Loading...
Need help?
General
