36
TEST PROCEDURE
Product I/O User
Control
Trigger User Action
SubMatch
THRU
⑪
Use SubMatch cable
connect SubMatch THRU
port and another product’s
SubMatch In port
Enable another product to pow-
er on and output audio signal.
G1/G2
SubMatch
In
⑫
Use SubMatch cable con-
nect SubMatch In port and
another product’s Sub-
Match THRU port
Enable G1/G2 to power on and
output audio signal
IEC con-
nector
⑬
Plug in power cable Enable the product to power on
Button Extended Functions Test (continued):
5.2 Before returning the system to the customer, Factory Default the system by pressing and holding
the Power Button for 10 seconds. Verify that all of the LED’s ash 1 time. The DUT reboot and reset
all settings to default value.
To Next Page
Loading...
