Bose ULTRA OPEN EARBUDS - Reconnect to a Device

34
|
ENG
BLUETOOTH CONNECTIONS
RECONNECT TO A DEVICE
Reconnect to the most recently-connected device
When the earbuds are removed from the case, they connect to the most
recently-connected device.
NOTES:
• The device must be within range (30 ft or 9 m) and powered on.
• Make sure the Bluetooth feature is enabled on your device.
Reconnect to a different device
You can set a shortcut to reconnect to a dierent device in the earbud device list.
NOTE: To reconnect to a dierent device using the earbuds, you must set a shortcut
to Switch Devices (see page 20).
1. Press and hold the earbud buon assigned to this shortcut.
A voice prompt announces the name of the currently-connected device, followed
by the names of the other devices in the earbud device list.
2. When you hear the correct device name, release the buon.
You hear a tone that indicates when the device is connected.
TIP: You can also reconnect to a dierent device using the Bose Music app
(see page 12) or the device Bluetooth seings.