Bose ULTRA OPEN EARBUDS User Manual

CONNECT BOSE PRODUCTS
39
|
ENG
Connect using the Bose Music app
1. With the earbuds in the charging case and the case open, press and hold the
buon on the back of the case until the earbud status lights slowly blink blue.
NOTE: Make sure both earbuds are in the case and the case is open.
2. Use the Bose Music app to connect the earbuds to a compatible Bose product.
For more information, visit:
support.Bose.com/Groupssupport.Bose.com/Groups
NOTES:
• It could take up to 30 seconds to connect.
• Make sure that the earbuds are within 30 ft (9 m) of your soundbar or speaker.
• You can connect the earbuds to only one product at a time.
RECONNECT TO A BOSE SMART SPEAKER OR SOUNDBAR
Use the Bose Music app to reconnect the earbuds to a previously-connected
compatible Bose product. For more information, visit:
support.Bose.com/Groupssupport.Bose.com/Groups
NOTES:
• Your soundbar or speaker must be within range (30 ft or 9 m) and powered on.
• If the earbuds don’t reconnect, see “Earbuds don’t reconnect to a
previously-connected Bose Smart Soundbar or Speaker” on page 52.

Bose ULTRA OPEN EARBUDS Specifications

General

Brand	Bose
Model	ULTRA OPEN EARBUDS
Type	Open Ear
Water Resistance	IPX4
Microphone	Yes
Noise Cancellation	No
Bluetooth Version	Bluetooth 5.3
Spatial Audio	Yes
Colors	Black, White
Battery Life	Up to 7.5 hours (earbuds), up to 19.5 hours (with charging case)