Bose ULTRA OPEN EARBUDS - Android Devices Only; Connect Using Fast Pair

36
|
ENG
BLUETOOTH CONNECTIONS
ANDROID DEVICES ONLY
If you have an Android device, you can access the following additional
connection features.
Connect using Fast Pair
In one tap, the earbuds enable quick, eortless Bluetooth pairing with your
Android devices.
NOTES:
• To use Fast Pair, you need an Android device running Android 6.0 or higher.
• Your Android device must have the Bluetooth and Location features enabled.
1. With the earbuds in the charging case and the case open, press and hold the
buon on the back of the case until the earbud status lights slowly blink blue.
NOTE: Make sure both earbuds are in the case and the case is open.
2. Place the case next to your Android device.
A notification appears on your device prompting you to pair the earbuds.
NOTE: If you don't see a notification, check that notifications are enabled for the
Google Play Services app on your device.
3. Tap the notification.
Once the earbuds are connected, a notification appears confirming that the
connection is complete.
NOTE: You can also tap the buon on the notification to download the Bose
Music app and finish seing up the earbuds.