Boss Snowplow RT3 - Snowplow Mounting; Attaching the Plow

g032942
Figure14
1.Swivelmount
2.Mountingtab
4.Removethebackingfrom1sideoftheadhesive
andapplyittothebackoftheswivelmount.
5.Removetheremainingbackingfromthe
swivel-mountadhesiveandpresstheswivel
mounttothecleanareaofthedashboardfor30
seconds.
Important:Oncethemountisplaced,you
cannotremoveitwithoutdestroyingthe
adhesive.
6.Cleanthebackofthecontrollerwiththealcohol
wipeandthendryit.
7.Removethebackingfrom1sideoftheadhesive
andapplyittothebackofthemountingtab
(Figure14).
8.Removetheremainingbackingfromthe
controlleradhesiveandpressthemountingtab
tothecontrollerfor30seconds.
9.Lettheswivelmountrestunusedfor72hours
beforeslidingthecontrollerintothemounting
bracket.
Important:Mountingthecontroller
immediatelymaycausetheadhesivetofail.
10.Continuethewireharnessinstallationfromstep
6ofInstallingtheWireHarness(page8).
MountingtheSnowplow
RefertoMountingtheSnowplow(page11)tomount
theplow.
11