Boss Snowplow RT3 - Install Blade Guides and Fill Reservoir; Install Wire Harness

InstallingtheBladeGuides
andFillingtheHydraulic
Reservoir
1.Attachthebladeguidestotheplowbladeusing
2bolts(5/16inch),2self-tappingbolts,and2
self-lockingnuts(Figure7).
g037973
Figure7
1.Self-lockingnut3.Bolt(5/16inch)
2.Bladeguide
4.Self-tappingbolt
2.Ensurethattheliftcylinderiscompletely
collapsed.
3.Removethellcapfromthehydraulicreservoir
elbow(Figure8).
g320664
Figure8
4.SlowlyllthereservoirwithBOSS
high-performancehydraulic-uiduntilit
acceptsnomore.
Note:Thereservoirholdsapproximately1.9L
(2USqt)ofhydraulicuid.
5.Installthepreviouslyremovedllcap.
InstallingtheWireHarness
DANGER
Vehicleenginescontainmovingpartsandcan
becomeextremelyhot,capableofcausing
severeburnsandseriousbodilyharm.
Shutofftheengineandallowitsufcienttime
tocooldownbeforeinstallingthiskit.
DANGER
Vehiclebatteriescancausedangerous
electricalshocksthatcouldleadtosevere
burnsordeath.
Disconnectyourbatterybeforeinstallingthis
kit.
Note:Applydielectricgreasetoallelectrical
connections.
8