12
Part Names and Functions
ON/OFF pedal
ON/OFF indicator
The effects are alternately switched on
and off each time this pedal is pressed.
The ON/OFF indicator lights when the
effects are on.
ON:
Sounds set using the AD-8 are output.
OFF:
Sounds are output exactly as input
(Bypass) or muted (Mute).
“ON/OFF Pedal Operation” (p. 14)
“Setting the Function Used When the
Effects Are Off (Bypass/Mute)” (p. 17)
TUNER
TUNER meter
This shows the difference between the note indicated in the
tuner display and the pitch of the sound being input while
the tuner is operating.
TUNER display
This indicates the note names when the tuner is operating.
“How to Use the Tuner” (p. 18)
* Settings values and other information is displayed here when
the tuner is not active.
PITCH button
This sets the tuner’s reference pitch.
“Changing the Reference Pitch (PITCH)” (p. 18)
BYPASS/MUTE button
This sets whether the AD-8 switches to Bypass or Mute
mode when the effects are switched off with the ON/OFF
pedal.
“Setting the Function Used When the Effects Are Off
(Bypass/Mute)” (p. 17)
ANTI-FEEDBACK indicator
Indicates the status of the anti-feedback function.
“How to Use the ANTI-FEEDBACK” (p. 19)
Flashing: Detection of feedback
frequencies in progress
Lit solidly: On
Unlit: Off
AD-8_e.book 12 ページ ２００７年６月２０日 水曜日 午前９時３４分
To Next Page
Loading...
